 | 110 Deg. PRO3 / PRO4 & PRO TOOLS ROUND TUBE DIES SETS |
"110 Degree":
The die will allow you to bend up to
"90 Degrees".
"CLR":
The most common specification for the
arc of a tube bend. Physically, it is the location of the crown of bend;
geometrically, it is the continuation of the vertical centerline of the tube
into the arc.
"TUBE":
A round piece of material that the
diameter is measured on the out side of the round material.
|
| 240 Deg. PRO3 / PRO4 & PRO TOOLS ROUND TUBE DIES SETS |
"240 Degree":
The die will allow you to bend up to
"180 Degrees".
"CLR":
The most common specification for the
arc of a tube bend. Physically, it is the location of the crown of bend;
geometrically, it is the continuation of the vertical centerline of the tube
into the arc.
"TUBE":
A round piece of material that the
diameter is measured on the out side of the round material.
|
| 110 Deg. PRO3 / PRO4 & PRO TOOLS ROUND PIPE DIES SETS |
"110 Degree":
The die will allow you to bend up to
"90 Degrees".
"CLR":
The most common specification for the
arc of a tube bend. Physically, it is the location of the crown of bend;
geometrically, it is the continuation of the vertical centerline of the tube
into the arc.
"PIPE":
A round piece of material that the
diameter is measured on the inside of the round material.
|
| 240 Deg. PRO3 / PRO4 & PRO TOOLS ROUND PIPE DIES SETS |
"240 Degree":
The die will allow you to bend up to
"180 Degrees".
"CLR":
The most common specification for the
arc of a tube bend. Physically, it is the location of the crown of bend;
geometrically, it is the continuation of the vertical centerline of the tube
into the arc.
"PIPE":
A round piece of material that the
diameter is measured on the inside of the round material.
|
 | 110 Deg. PRO3 / PRO4 & PRO TOOLS SQUARE TUBE DIES SETS |
"110 Degree":
The die will allow you to bend up to
"90 Degrees".
"CLR":
The most common specification for the
arc of a tube bend. Physically, it is the location of the crown of bend;
geometrically, it is the continuation of the vertical centerline of the tube
into the arc.
"Square Tube":
A square piece of material that is measured on the
out side of the square material.
|
| 240 Deg. PRO3 / PRO4 & PRO TOOLS SQUARE TUBE DIES SETS |
"240 Degree":
The die will allow you to bend up to
"180 Degrees".
"CLR":
The most common specification for the
arc of a tube bend. Physically, it is the location of the crown of bend;
geometrically, it is the continuation of the vertical centerline of the tube
into the arc.
"Square Tube":
A square piece of material that is measured on the
out side of the square material.
|
Login Status
